Diamond wall saw
Mounted on a track on the wall, it cuts straight lines at increasing depth — suited to doors and windows.
Concrete cutting and coring in Dammam and the Eastern Province
Cutting concrete walls, slabs and floors with diamond saws to open doors, windows, lift shafts and stairs — straight edges, no random breaking.
- New door and window openings in concrete walls
- Slab cuts for lift shafts and stairs
- Wet cutting that keeps dust and vibration down
About Concrete cutting and coring
Concrete cutting is engineering, not demolition: the goal is an opening of the exact size with clean edges, without cracking the walls around it, shaking the slab or damaging the finishes next to it. That is why we use wall and floor saws with diamond blades, and a wire saw for very thick sections, with water cooling that keeps dust and heat down. We mark the cutting line before starting, review the rebar and services with you, and check whether the opening needs temporary propping or strengthening after the cut.
Diamond cutting of reinforced concrete
What the service includes
- New door openings or widening existing ones
- Window openings in concrete walls
- Slab cuts for lifts, stairs and light wells
- Floor cuts for plumbing and drainage runs
- Cutting beams and shear walls after a structural review
- Cutting concrete into blocks and lifting them out
Methods and equipment
How we do it and with what equipment
Floor saw
For cutting slabs, concrete floors and asphalt for plumbing, drainage and electrical runs.
Wire saw
A diamond wire looped around the section, for thick parts, beams and columns a blade cannot reach.
Core drill
Round holes at the corners of an opening, or for AC and plumbing runs before cutting.
Water cooling and slurry control
Cools the blade and cuts dust; we protect floors and collect the cutting water as we go.
Temporary propping
Steel props before large openings in load-bearing walls where needed.
How it is done
How Concrete cutting is done
- 1
Inspection and marking
We measure the wall or slab, mark the position and size of the opening, and check the rebar and services.
- 2
Structural check
For load-bearing walls and beams we explain whether the opening needs temporary props or strengthening afterwards.
- 3
Cutting and lifting
We cut with the diamond saw under water cooling, then cut the concrete into blocks and lift them out without breaking what surrounds them.
- 4
Cleaning and handover
We collect the water and debris and hand over the opening ready for rendering or fitting the door or window.
Estimated prices
What does Concrete cutting cost?
The price depends on measurements, site condition and access, and is written in the offer after the inspection.
Estimated prices: Concrete cutting and coring
- Door opening in a concrete wallPrice set after inspection and measurements
- Window openingPrice set after inspection and measurements
- Slab cut for a lift or stairPrice set after inspection and measurements
- Floor cutting per linear metrePrice set after inspection and measurements
Estimated prices — final price after site inspection and agreement
Request an inspection: Concrete cutting
Fill in the details and WhatsApp opens with your request so we can arrange the inspection.
Your request is saved.
Open WhatsApp to send the requestArticles
Articles about Concrete cutting
Concrete cutting
Concrete Cutting in Al-Ahsa
Concrete cutting in Al-Ahsa for homes, villas, rest houses and shops in Hofuf, Mubarraz and the oasis…
Read article
Concrete cutting
Concrete Cutting in Al Khobar
Concrete cutting in Al Khobar for apartments, villas, shops and offices: shopfront and door openings in…
Read article
Concrete cutting
Concrete Cutting in Ras Tanura
Concrete cutting in Ras Tanura and Rahima: door and window openings in concrete walls, AC and drainage cores,…
Read article
Concrete cutting
Concrete Cutting in Dhahran
Concrete cutting in Dhahran for villas and homes: door openings through existing walls to link annexes and…
Read article
Concrete cutting
Concrete Cutting in Abqaiq
Concrete cutting in Abqaiq for homes, shops and small workshops: core holes for AC and drainage, wall, slab…
Read article
Concrete cutting
Concrete Cutting in Qatif
Concrete cutting in Qatif, Tarout and Safwa: AC and drainage core holes, door and window openings, and slab…
Read articleFAQ
Questions about Concrete cutting
Does concrete cutting crack the wall?
Diamond sawing works by abrasion, not impact, so it causes far less vibration than breaking and leaves straight edges. Before starting we check whether an opening in a load-bearing wall needs support.
Can a door be opened in a load-bearing wall?
Usually yes, after a structural review: we set the size and position, put up temporary props if needed, and tell you whether it needs a steel frame afterwards.
Is there a lot of dust?
We cut wet, so there is much less dust than dry cutting. We cover nearby furniture and floors and collect the cutting water before it spreads.
How long does a door opening take?
It depends on the wall thickness, the reinforcement, where the opening is and how easy it is to reach; we give you the expected time after inspection.
How is the price worked out?
By the concrete thickness, the length of the cuts, the machine needed and access; the price is set after inspection and measuring.
Other services